No data

No data

undefined
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

Calcined zinc oxide 99%

In order to improve the physical properties of raw zinc oxide obtained through zinc vapor refining, such as direct and indirect zinc oxide, and the impact of its related chemical composition on ceramic glazes, heavy calcined zinc oxide is obtained after high-temperature processing and calcination.

Tag:

Product Details

In order to improve the physical properties of raw zinc oxide obtained through zinc vapor refining, such as direct zinc oxide and indirect zinc oxide, and their related chemical composition, heavy calcined zinc oxide is obtained after high-temperature processing and calcination.

Calcined zinc oxide has a high specific gravity and good fluidity, resulting in low shrinkage of the glazes produced, making it less likely for the glaze surface to develop pinholes and cracks. In addition to its specific gravity, the product quality standards of calcined zinc oxide are the same as those of graded zinc oxide.

The zinc oxide after high-temperature calcination appears light yellow, with a melting point of 1975°C.

Calcined zinc oxide is an important raw material for ceramic chemical flux, especially used in building ceramic wall and floor tile glazes, as well as low-temperature porcelain glazes and ceramic colorants. It is also widely used in artistic ceramic glazes. Its role and use in glazes: ZnO has a strong fluxing effect in glazes, which can reduce the expansion coefficient of the glaze, improve the thermal stability of the product, and increase the gloss and whiteness of the glaze, enhancing its elasticity. While expanding the melting range, it can also enhance the brilliance of the glaze color. However, it should be used cautiously in black glazes containing chromium. In summary, ZnO is mainly used in the following aspects:

1. As a flux: When used as a flux in low-temperature frit glazes, the general dosage is between 5% and 10%, with a typical amount of about 5% in low-temperature raw material glazes.

2. As a clouding agent: Adding zinc oxide to glazes with a high content can improve the cloudiness of the glaze surface. This is because ZnO can form zinc spinel crystals. In zinc-containing clouding glazes, it can enhance the whiteness and cloudiness of the glaze surface. SiO2 can improve the gloss of the glaze surface.

3. As a crystallizing agent: In artistic glaze crystallization glazes, ZnO is an indispensable crystallizing agent, forming large crystal patterns during rapid cooling of the molten glaze, which are very beautiful. In crystallization glazes, the dosage of ZnO can reach 20% to 30%.

4. For making cobalt sky blue glaze: ZnO is a very important flux in cobalt sky blue glaze, as it allows cobalt oxide to form a beautiful sky blue color in the glaze.

5. As a ceramic pigment: Due to its strong fluxing effect, ZnO can serve as a fluxing agent, mineralizer, and color carrier for ceramic pigments. It is used as a main raw material in the brown ceramic colorant series.

6. As a glass additive: Zinc oxide with added aluminum, gallium, and nitrogen can achieve a transparency of 90%, making it suitable for glass coatings that allow visible light to pass through while reflecting infrared rays. The coating can be applied to the inside or outside of window glass to achieve insulation or heat resistance.

Product Inspection Report

Appearance of Zinc Oxide Powder
Item Index
Calcination Method Indirect Method
1 Zinc Oxide ZnO %Min 99 99.6 99.7
2 Lead Oxide PbO %Max 0.05 0.03 0.02
3 Cadmium Oxide CdO %Max 0.005 0.005 0.0005
4 Ferric Oxide Fe2O3 %Max 0.06 0.04 0.0002
5 Insoluble in Hydrochloric Acid ----- %Max 0.02 0.01 0.0003
6 Loss on Ignition ----- %Max 0.1 0.06 0.04
7 Water Soluble ----- %Max 0.45 0.40 0.02
8 Residue on Sieve (325 mesh) ----- %Max 0.50 0.30 0.02
9 Moisture ----- %Max 0.0066 0.10 0.001
10 Specific Gravity ----- %Max 2.9 2.9 0.1

INQUIRY IMMEDIATELY

Filling in your phone and E-mail information will help us to get in touch with you in time and solve your problems as soon as possible.

Contact Us

We will contact you within one working day, please pay attention to your email.

Contact Us

Production base:Shiliangzhuang Industrial Zone, Gaoyi County, Hebei Province, China

Service Hotline: +86-17798188886

E-mail:jxinxinye@126.com

Foreign Trade Department

Mobile/Whatsapp: +86-18232113882

E-mail:sales@jixinxinye.cn

Foreign Trade Department

Mobile/Whatsapp: +86-18232113882    +86-15232129662

Shijiazhuang Tatan International Trade City, Hebei Province, China

Copyright©Shijiazhuang Jixin Zinc Industry Co., Ltd.

Powerby:300.cn|SEO |City List | Privacy Policy | 

Business License

INQUIRY IMMEDIATELY

Submit requirements, contact us

* Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible.

Submission